复合材料胶补飞机损伤金属结构疲劳寿命分析

针对复合材料单面胶接修理飞机损伤金属结构疲劳寿命分析时,多种失效模式耦合作用、残余热应力和附加弯曲力矩以及裂纹非均匀扩展的影响,提出了一种能够综合考虑上述影响因素的复合材料修理损伤金属结构疲劳寿命评估方法。算例分析结果与试验结果吻合,表明本文方法可为复合材料单面胶接修理损伤金属结构疲劳寿命估算提供参考。     

一种修正的Osher通量在高阶WCNS中的特性

将一种基于多维修正的Osher通量运用于高阶加权紧致非线性格式(WCNS)中,该修正通量主要在垂直于激波面的界面上增加耗散,能够改善Osher通量的激波捕捉稳定性,同时对边界层和接触间断的分辨率影响非常小。对修正的Osher通量在高阶WCNS中的特性进行研究,通过数值模拟测试了基于Osher通量的WCNS的激波稳定性、热流预测精度、边界层模拟能力、激波边界层干扰模拟能力,并与Steger-Warming通量和Roe通量进行了对比。结果表明修正后的Osher通量比Harten修正的Roe通量具有更好的激波捕捉鲁棒性,而边界层、驻点热流值和激波边界层干扰的模拟则明显优于Steger-Warming通量。上述结果说明了基于修正的Osher通量的高阶WCNS具有较好的激波捕捉特性、热流预测精度和边界层计算能力。     

硅橡胶/双酚A-苯胺型苯并噁嗪树脂耐烧蚀复合材料的制备与烧蚀结构的研究

苯并噁嗪树脂具有优异的成炭和抗高温氧化性能,是新一代的耐烧蚀树脂。以双酚A-苯胺型苯并噁嗪树脂为耐烧蚀树脂,采用1H-NMR、DSC和转矩流变仪研究其成环率和加工性能;以硅橡胶为耐烧蚀基体,采用熔融共混方法制备了硅橡胶苯并噁嗪树脂耐烧蚀复合材料。进行力学和氧乙炔焰烧蚀检测,利用FT-IR、Raman和SEM研究复合材料综合性能和烧蚀结构。结果表明:苯并噁嗪树脂能够明显提高硅橡胶复合材料的耐烧蚀性能,当树脂添加量为20份时,复合材料具有较好的耐烧蚀和力学性能;该复合材料经过氧乙炔焰烧蚀后,烧蚀层形成表面陶瓷层、裂解炭化层和基体层。表面陶瓷层主要由SiO_2,SiC和C组成,裂解炭化层的主要组由C,SiO_2,SiC以及炭化彻底的碳和炭化不完全的有机结构组成。     

Ti/Al叠层结构低频振动制孔试验研究

钛合金与铝合金叠层构件的装配孔制备过程中存在孔壁质量差、尺寸超差等问题,为解决该问题,开展了低频轴向振动扩孔、铰孔与传统扩孔、铰孔的对比试验,重点分析了其在切屑形态、加工质量等方面的差异.结果表明,振动制孔技术能够产生C形或发条形切屑,利于切屑排出,减小铝合金孔壁的划伤.使用振动辅助技术进行一次扩孔与一次铰孔后,钛合金与铝合金孔壁粗糙度均可低于Ra0.6μm,孔径精度可满足H7公差等级,出口毛刺高度小于200μm.     

基于降维算法和等效杆长的可展结构精度分析

考虑铰链间隙和杆件尺寸误差的不确定性并通过概率统计方法对其进行研究,提出了一种基于单变量降维算法(UDRM)和等效杆长模型的可展结构精度分析方法。利用UDRM将可展结构的精度性能函数解耦为多个杆件尺寸误差的独立作用形式,建立精度分析模型。引入等效杆长模型,等效杆件替代原杆件进行精度计算。将铰链间隙与原始杆件尺寸误差合并到等效杆件的尺寸误差中,同时证明了等效杆长尺寸误差近似服从正态分布。以某卫星可展开天线为算例,结合高斯求积公式求解展开状态下精度指标的分布期望和方差。通过与蒙特卡罗模拟(MCS)和一次二阶矩(FOSM)法计算结果的对比验证了本文精度分析方法的正确性和高效性。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

基于等效板的含离散源损伤机翼结构分析

研究离散源损伤对机翼结构的影响,可以大幅度提高飞机在不良损伤事故下的生存能力.由于机翼内部结构复杂,很难对含离散源损伤机翼结构进行精确分析,而且精确的建模和仿真在建模与计算过程中往往也非常耗时.因此,以含离散源损伤机翼为对象,采用有限元优化设计方法,确立了一种机翼结构等效板模型的建模方法.建立的等效板模型可对含离散源损伤机翼实现快速、准确的静力学和动力学分析.     

提高机务专业"航空发动机构造"教学效果的思考

结合机务专业"航空发动机构造"课的教学实践,阐述了针对课程特点激发学生学习兴趣、丰富教学手段、优化教学方法、改革作业形式、开展现场教学的重要性及其具体实施办法.首次应用三维虚拟发动机辅助教学、并引入机务维修工作中发动机结构图作为课程作业用图.本研究成果为提高"航空发动机构造"课的教学效果探索出了一套行之有效的方法.     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

一种新的柔性蜂窝结构及其在变体飞机中的应用

变体色机要求机翼结构可以光滑连续地变形.机翼的蒙皮要有足够大的面内伸缩变形能力,同时还要有足够的面外承载能力.本文针对后缘变弯度机翼,设计出一种新的柔性蜂窝结构.研究了该柔性蜂窝的面内变形能力和形状参数的关系.仿真分析和试验验证表明,该柔性蜂窝结构具有足够的面内变形能力,变形后仍保持良好的面外承载能力,满足后缘变弯度机...